Tested for

Perfection

Thomas Olczyk is working with Harder & Steenbeck Infinity +

Tested for

Perfection

Enrico Lein is working with Harder & Steenbeck Evolution twin action +

Tested for

Perfection

Younes Bouchlouch is working with Harder & Steenbeck Grafo +

Tested for

Perfection

Julia Stoess is working with Harder & Steenbeck Colani +

Tested for

Perfection

Angel Giraldez is working with Harder & Steenbeck Evolution ALplus +

Advice/ FAQ

Dear reader, 

here we will publish tips and will answer some of the most commonly asked questions. This site will be updated frequently, so visit often. We hope that we will be able to help you out with our answers.

blubbern im Farbbecherunregelmäßige FarbfreisetzungSpinnenbeine beim brushen

Airbrush sprays paint intermittantly
Problem
Airbrush sprays paint intermittantly
Paint is too thick or lumpy
Insufficient air pressure
Solution
Clean airbrush thoroughly
Dillute paint or get new/different paint
Increase air pressure
Bubbling in paint cup
Problem
Air cap is not tight
Nozzle seal is missing, dirty or defectiv
Defective, frayed nozzle
Solution
Tighten air cap
Replace or clean seal
Replace nozzle
"Spider legs while air brushing"
Problem 
Paint consistancy is too thin
Too much air pressure
Air brush is too close to the object
Paint coat is too thick
Solution
Adjust paint consistency
Reduce pressure
Hold air brush further away from object
Reduce paint coat with even sweeping motions across object
No air
Problem
Compressor is not "on" or defective
Air hose is kinked
Air hose connector is loose
Solution
Turn compressor on or repair
Straighten out air hose
Correct connection
Air pressure can't be regulated
problem
Air valve sticks
Solution
Unscrew air valve and put a drop of oil on the small o-ring

Subscribe to the newsletter